Aplicaciones Médicas

1 / 1

Más

Los productos y sistemas MACtac Medical se encuentran en diferentes aplicaciones, incluyendo los electrodos de un solo uso, campos quirúrgicos, vendajes para heridas y sistemas de suministro de medicamentos transdermales. Todos los productos se fabrican en instalaciones que cumplen la ISO o la certificación (cGMP) para asegurar la calidad del producto y el confort del paciente.

Principales aplicaciones
Electrodos/parches adhesivos para el contacto continuado con la piel
Campos quirúrgicos
Montaje de aparatos técnicos que puedan entrar en contacto con la piel. (Adhesivos agresivos adecuados para el polietileno)
Fabricación de vendas, gasas, esparadrapos y sistemas de suministro de medicamentos a través de la piel.

Ver la oferta de productos Médicos MACtac

Referencia	Descripción	Adhesivo	Protector	Espesor	Espesor del adhesivo	Ficha técnica
TM-1015	deep matte clear polyethylene film coated on one side with 25.5µ of acrylic medical grade adhesive, protected by 80 gr PEK release liner.	acrylic	PEK release liner	38 µ	63.5 µ
TM-1030	deep matte clear polyethylene film coated on one side with 25.5 µ of acrylic medical grade adhesive protected by 80 gr PEK release liner.	acrylic	PEK release liner	76 µ	100 µ
TM 5300	76 µ translucent matte polyurethane film coated on one side with a skin friendly	Acrylic	80 gr white calendered release liner.	76 µ	101.6
TM-5151	translucent matte polyurethane film coated on one side with a skin friendly breathable acrylic based adhesive protected by a 80 gr poly-coated release liner.	breatheable acrylic	poly-coated release liner	25.4 µ	50 µ
TM 8710	PET coated on two sides with a latex free, synthetic elastomer adhesive. The adhesive is protected by an 80 gr SCK release liner	synthetic elastomer adhesive	80 gr SCK with a silicone release coating on two sides.	12.7 µ	104 µ
TM 6563	Double-sided foam coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive. TM-6563 was designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	semi bleached kraft release liner	0.8 mm	63.5µ
TM 6570	Single-sided film coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for mounting electro-medical devices to the human skin. Applications : electrocardiograph pads, grounding pads, etc ..	SBMA	densified, semi-bleached kraft release liner	90µ	63.5µ
TM 9409	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive.formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads,IV holders	SBMA	polycoated white kraft release liner.	3.2 mm	63.5µ
TM 9478	Single-sided non woven tape coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for use as a breathable medical tape : TENS and stress electrodes plus protective pads and covers	SBMA	densified, semi-bleached kraft release liner	68.5 gr/m²	355 µ – 455 µ
TM 9479	ingle-sided non woven tape coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for use as a breathable medical tape : TENS and stress electrodes plus protective pads and covers	SBMA	densified, semi-bleached kraft release liner	68.5 gr/m²	355-455 µ
TM 9710	Double-sided film with acrylic based, hypoallergenic pressure sensitive adhesive. designed for assembling medical devices where skin contact is possible. The adhesive is very aggressive and bonds well to polyethylene	SBA	densified, semi bleached kraft release liner.	12.7µ	35.6µ
TM 9616	Double-sided foam tape coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive.designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	densified, semi-bleached kraft release liner	1.6 mm	63.5µ
TM 9716	Single-sided tape made of a crosslinked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. Low tack pediatric tape used for EKG pads, Transdermal delivery	SBMA	polycoated white kraft release liner	1.6 mm	35.6µ
TM 9720	Double-sided film with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for assembling medical devices where skin contact is possible. The adhesive is very aggressive and bonds well to polyethylene.	SBA	densified, semi bleached kraft release liner.	12.7 µ	50.8 µ
TM 9942 NK	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive.formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads,IV holders	SBMA	polycoated white kraft release liner	0.8 mm	63.5 µ
TM 9946	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive. formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads, IV holders.	SBMA	polycoated white kraft release liner	1.6 mm	63.5µ
TM 9947	Cross linked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBA	white calendered release liner.	1 mm	50 µ
TM 9976-60	Cross linked 1.6 mm polyethylene foam coated on one side with an acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr semi-bleached SCK paper release liner.	SBMA	80 gr semi-bleached SCK paper release liner	1.6 mm	1643 µ
TM 9979	Cross linked polyethylene foam coated on one side with 597acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBMA	80 gr white calendered release liner.	1.5 mm	1550 µ

Cintas técnicas y Especialidades

Aplicaciones Médicas